 
High Power Wireless Sensors
Features
|
Temperature |
|
|
Humidity |
|
Barometric Pressure |
|
Email Alarms |
|
Web Server |
|
No Special Software Required |
|
The rugged high-performance, high power NEWPORT® wiSeries wireless sensors featured on this page are compatible with the NEWPORT zSeries and wiSeries system for Web-based monitoring of Temperature, Humidity, and Barometric Pressure.
|
wiSeries Wireless Monitor, Scanner & Controller
|
|
The radio is a High Power IEEE 802.15.4 compliant transmitter operating at 2.4 GHz designed to transmit over greater distances and through more obstructions than the standard transmitter.
These wireless sensors transmit up to 1000m (3280’)--without obstructions or interferences to a zSeries coordinator or wiSeries meter-controller. The coordinators and controllers connect directly to an Ethernet network and the Internet and serve active Web Pages to display and chart the data.
You can monitor and record Temperature, Relative Humidity, and Barometric Pressure over an Ethernet network or the Internet without any special software--just your Web Browser.
You can even set alarms to be notified by email. Alarms can be sent to a single user or to a group distribution list, including text messages to cell phones.
These wiSeries wireless sensors are designed for demanding industrial applications indoors and harsh outdoor environments. The electronics are protected in a rugged weatherproof polycarbonate NEMA4 / IP65 rated housing. The rugged industrial sensors are supplied with ten feet of cable.
|
WIRELESS SENSORS
Wireless sensors are available with external probes appropriate for an almost unlimited variety of industrial and commercial applications.
NEWPORT offers a selection of end devices for a variety of applications. The high power end device supports one external sensor. The external sensors are designed for harsh environments such as outdoor weather, in HVAC ducts, in freezers and refrigerators.
|
External Sensors with 10' of Cable
|
NEWPORT offers wireless sensor/transmitters that run on either batteries or AC power. The battery version comes with two alkaline D-Cell batteries that can last for years. The AC version comes with a 5 VDC universal AC adapters that operates on any voltage worldwide (110-240 VAC). Should AC power fail, the unit can operate on a 3.6V ultra-long-life lithium backup battery (included). It can run on battery power for days, weeks, or months depending on the user's settings.
ALARM AND EMAIL
The wiSeries wireless sensor system can trigger an alarm if variables go above or below a set point that you determine. Your alarm can be sent by email to a single user or to a group distribution list, including text messages to cell phones and PDA’s. The NEWPORT "MailNotifier" software is a free and easy program for this application.The meter-controller connects directly to an Ethernet Network or the Internet. Unlike an RS232 or USB device, it does not require a host computer.
EMBEDDED WEBSERVER
The NEWPORT wiSeries wireless sensor system is easy to install, simple to operate, and features NEWPORT’s award-winning iServer technology with an Embedded Web Server that requires no special software.
|
CHARTS AND GRAPHS
The NEWPORT wiSeries system serves Active Web Pages to display real time readings and charts of temperature, humidity, and barometric pressure. You can also log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic.
NEWPORT offers a free and easy to use program for logging data to Excel. The virtual chart viewed on the web page is a JAVA™ Applet that records a chart over the LAN or Internet in real time. With the NEWPORT wiSeries system there is no need to invest time and money learning a proprietary software program to log or chart the data.
Chart scales are fully adjustable on the fly. For example, the chart can display one minute, one hour, one day, one week, one month or one year. Temperature and humidity can be charted across the full span (-40 to 125°C, and 0 to 100% RH) or within any narrow range such as (20 to 30°C). NEWPORT offers an OPC Server software ($295) that ma kes it easy to integrate the wiSeries wireless sensor system with many popular Data Acquisition and Automation programs offered by Omega, Wonderware, iConics, Intellution, Rockwell Automation, and National Instruments, among others.
|
Screen Shots from wiSeries
 |
QUALITY and TECHNOLOGY
Designed and manufactured in the USA, the innovative NEWPORT® wiSeries system features an extended one (1) YEAR warranty at no extra charge.
| SPECIFICATIONS - SENSOR SPECIFICATIONS |
| TEMPERATURE |
RELATIVE HUMIDITY |
Accuracy/Range*:
-TP1, -TP2 (external sensor)
±0.5ºC for 10º to 85ºC (±0.9ºF for 50º to 185ºF)
±1ºC for -40º to 10ºC and 85º to 125ºC
(±1.8ºF for -40º to 50ºF and 185º to 257ºF)
-THP (external sensor)
±0.5ºC for 0ºC to 45ºC (±0.9ºF for 32º to 113ºF)
±1ºC for -18º to 0ºC and 45º to 70ºC
(±1.8ºF for -0.4º to 32ºF and 113º to 158ºF)
±2ºC for -40º to -18ºC and 70º to 124 ºC
(±3.6ºF for -40º to -0.4ºF and 158º to 255ºF)
-BTP (external sensor)
±0.8ºC @ 20ºC (±1.5ºF @ 68ºF)
±2ºC for -40º to 85ºC (±3.6ºF for -40º to 185 ºF)
*Note: extended temperature ranges are for External Probes only, the End Device’s operating temperature is -20º to 70ºC (-4º to 158ºF)
Resolution: 0.1ºC
Repeatablilty: ±0.1ºC, for zED-THP-P
|
Accuracy/Range:
zED-THP-P
±2% for 10 to 90%; ±3% for 0 to 10% and 90 to 100%
Hysteresis: ±1% RH
Non-linearity: ±3%
Repeatability: ±0.1%
Resolution: 0.1%
BAROMETRIC PRESSURE
Accuracy/Range:
zED-BTP-P
±2 mbar for 10 mbar to 1100 mbar (1 KPa to 110 KPa)
Resolution: 0.1 mbar |
Industrial Probe: SS 316 housing, 137mm x Ø16mm (5” x Ø 0.63”) for zED-BTP-P, zED-THP-P
Stick Probe: ABS tubing, 152.4 mm x Ø6.35 mm (6” x Ø 0.25”) for zED-TP1-P
Lug Mounted Probe: Copper tubing, 53.4 mm x Ø 7.92mm (2.1” x Ø 0.312”);
mounting hole Ø 4.72mm (Ø 0.186”) for zED-TP2-P
Cable: 3 m (10’) long x Ø 2.62 mm (0.103”) for zED-TP1-P, zED-TP2-P, zED-THP-P
3 m (10’) long x Ø 4.45 mm (0.175”) for zED-BTP-P
Cable Operating Temperature: -80º to 200ºC (-112º to 392ºF) for zED-TP1, -TP2, THP-P
-55 to 105ºC (-67 to 221ºF) for zED-BTP-P
|
| END DEVICE TRANSMITTER SPECIFICATIONS
Transmitter Operating Temperature: -20º to 70ºC (-4º to 158ºF)
Storage Temperature: -40º to 125ºC (-40º to 257ºF)
Enclosure Dimensions: 135.9L x 82.0W x 39.D mm (5.35L x 3.23L x 1.56D")
Enclosure Material: Polycarbonate
Enclosure Protection: NEMA4/IP65
WIRELESS COMMUNICATION
Standard: IEEE 802.15.4, DSSS
Frequency: 2.4 GHz (2400 - 2483.5 MHz), 16 channels
Network Topology: Star Topology
Range: up to 1000 m (3280 ft) without obstructions or interference.
|
POWER
Power Input: 5 Vdc
Consumption:
0.8W max @ 20dBm; 0.5W max @ 10dBm
Safety Qualified ac Power Adapter (included)
Nominal Output: 5 Vdc @ 0.6 A
Input: 100-240 Vac, 50/60 Hz
Power Adapter Operating Temperature: 0º to 40ºC (32º to 104ºF)
Lithium Back-up Battery: one 3.6 Vdc, supplied
Lifetime: 2 years with frequency of 1 reading per 2 minutes @ 20dBm and 10dBm
|
|
GENERAL
Approvals: FCC: Part 15C.
CE: EMC 2004/108/EC, LVD 2006/95/EC, RTT&E 1999/5/EC.
Software: The software packages available for the zSeries wireless system are iConnect
(configuration software for the Ethernet interface), iLog (Excel-based software for automatic data
logging), and Mail Notifier (email alarm notification software)
|
iLOG Excel program logging the data
|
iLOG Excel program sketching the data |
Mechanical Dimensions
To Order (*Specify Model No.) Prices shown in U.S. dollars
A complete wireless system requires at least one End Device (zED-x-P) and one Receiver (wi8**-Z or zCDR)
Model # |
Description |
Price* |
zED-TP1-P |
Wireless Temperature Sensor w/ Stick Probe, ac powered |
$195 |
zED-TP2-P |
Wireless Temperature Sensor w/ Lug Mount Probe, ac powered |
$195 |
zED-THP-P |
Wireless Temperature and Humidity Sensor, ac powered |
$240 |
zED-BTP-P |
Wireless Barometric Pressure and Temp. Sensor, ac powered |
$245 |
|
| |
|
