|
Model
No.
|
SMART
TRANSMITTER FOR DC VOLTS, CURRENT, TEMPERATURE AND STRAIN
WITH SENSOR EXCITATION |
|
INFX
Series
|
Standard
features include 4-open collector outputs, wide selection
of input ranges, peak and valley detection, smart filtering,
large digital offset capabilities, on-board sensor excitation,
and field installable output, control and communication
options. |
|
INPUT
TYPE
|
DESCRIPTION |
PRICE
|
| TEMPERATURE
TRANSMITTER accepts
J, K, T, E, R, S, B, N and DIN J thermocouples plus 10 ohm
copper and all 100 ohm platinum 2-, 3- and 4-wire RTDs.
Selectable readings in Centigrade, Fahrenheit or Kelvin
Sensor break detection. Factory default setup is type “K”
T/C in °F. |
|
|
TEMPERATURE
TRANSMITTER |
$495.00
|
|
STRAIN TRANSMITTER for strain gage, pressure transducer,
load cell and virtually any bridge input. On-board transducer
excitation. Easy scaling to engineering units. Factory default
setup is 0-100 mV input with 10 V dc sensor excitation scaled
to display 0 to 100000. |
|
|
STRAIN
TRANSMITTER |
$445.00
|
| PROCESS
TRANSMITTER
accepts a wide selection of DC current and DC voltage inputs
as well as potentiometer and ratiometric inputs. Large digital
offset capability allows for easy scaling to virtually any
engineering unit. On-board excitation to power transducers
or current loops. Factory default is 4-20 mA input and 24
V dc sensor excitation to display 0 to 100000. |
|
|
PROCESS
TRANSMITTER |
$445.00
|
| UNIVERSAL
TRANSMITTER all
the capabilities of the Temperature, Process and Strain
versions available in one instrument. Factory default setup
is 0-100 mVdc input with 10 V dc sensor excitation to display
0 to 100000. |
|
|
UNIVERSAL
TRANSMITTER |
$545.00
|
| SCALE
TRANSMITTER for load cell, strain gage, pressure transducer
inputs. Handbook 44 certified for Class III, IIIL, IV. Standard
features include digital tare, class selection, scale division
selection, easy scaling to transmit in any engineering units,
10 or 24 Vdc sensor excitation. Factory default is 0-100
mV input with 10 Vdc sensor excitation. |
|
|
SCALE
TRANSMITTER |
$495.00
|
| |
|
OPTIONS
|
DESCRIPTION |
PRICE
|
| POWER
AND LED COLOR |
|
0
|
Designates
115 Vac power |
N/C
|
|
1
|
Designates
230 Vac power |
N/C
|
|
2
|
Designates
10-30 VDc power* |
$110.00
|
| *
dc power is not available with REL4 option below.
|
| BCD
AND CONTROL OUTPUT(S) |
|
0
|
Four
optically isolated open-collector outputs |
N/C
|
|
1
|
Isolated
parallel BCD output (BCD1) |
$110.00
|
|
2
|
Isolated
dual 7 amp relays (REL1) |
$75.00
|
|
3
|
Isolated
dual 7 amp and dual 1 amp relays (REL4) |
$175.00
|
| ANALOG
OUTPUT |
|
0
|
No
analog output |
N/C
|
|
1
|
Isolated
analog output (0-20 mA, 4-20 mA, 0-5 V 1-5 V, 0-10 V (AN02) |
$110.00
|
| SERIAL
OUTPUTS |
|
0
|
No
serial output |
N/C
|
|
1
|
Isolated
RS-232 serial output* (RS20) |
$110.00
|
|
2
|
Isolated
RS-485 serial addressable output* (RS40) |
$110.00
|
| *Includes
6' of interconnecting cable with telephone plug connectors.
See serial connector accessories below for conversion to
“D” type connectors. |
| TEMPERATURE |
|
TC
|
J,
K, E, T, B, S, N or DIN J in degrees C, F or K |
N/C
|
|
RTD1(**)
|
10
ohm copper** |
N/C
|
|
RTD2(**)
|
100
ohm platinum with 0.00385 alpha** |
N/C
|
|
RTD3(**)
|
100
ohm platinum with 0.00392 alpha** |
N/C
|
| **
Enter C for Centigrade, F for Fahrenheit, or K for Kelvin.
NOTE: All of the above ranges are available on the
"INFXU”. |
| ADD-ON
OPTIONS |
|
FS
|
Special
calibration configuration
|
$30.00
|
|
HPXUR
|
Hand-held
programmer/remote red display |
$150.00
|
|
HPXUG
|
Hand-held
programmer/remote green display |
$150.00
|
|
HPXWR
|
Hand-held
programmer/remote red display for INFXW |
$150.00
|
|
HPXWG
|
Hand-held
programmer/remote green display for INFXW |
$150.00
|
|
HPU
|
Bail-mount |
$50.00
|
| ACCESSORIES |
|
9SC2
|
9-pin
serial connector with RJ-11 jack for RS-232 |
$30.00
|
|
9SC4
|
9-pin
serial connector with RJ-12 jack for RS-485 |
$30.00
|
|
25SC2
|
25-pin
serial connector with RJ-11 jack for RS-232 |
$30.00
|
|
25SC4
|
25-pin
serial connector with RJ-12 jack for RS-485 |
$30.00
|
|
SP1
|
Split
connector for RS-485 network |
$15.00
|
